Archive for the Commodore Category


| October 18th, 2017


You will need a USB to serial adapter, a null modem cable/dongle, and a 9 to 25 pin serial cable (if your null cable isn’t already a 9 to 25).


Once you have your PlipBox and MiamiDx up and working, it is an excellent way to move .ADF images around to the computer.

Right click on AExplorer on the Amiga, and bring up the information box under the icons menu.

Change PACKETSIZE up to 4096 or larger.

Run AExplorer on the Amiga, and it should autodetect the TCP/IP Stack. If it comes up with serial, your TCP/IP stack isn’t running.

Right click on the Amiga Explorer on your windows desktop, and go to properties.

Make sure the address matches the IP address of the Amiga, and connection is set to TCP/IP

On the options tab, make sure the packet size matches the number you entered in the AExplorer tool PACKETSIZE parameter.

Please follow and like us:

PlipBox and MiamiDx

| October 18th, 2017

PlipBox and MiamiDX


The PlipBox is a budget ethernet adapter for the Amiga that plugs into the parallel port.

While far from the fastest, it offers about an 8 to 10 times speed increase over using serial. I found an .ADF image that would take 8 to 10 minutes to download over serial (19200 was the maximum reliable speed I could get), would be transfered in about a minute and a half over the plipbox.

The total cost for the hardware was under $20 for the arduino nano, and the network shield.

Constructing the PlipBox

Once you’ve built the hardware, and have the firmware loaded:

From the command line:

copy plipbox.device devs:networks/plipbox.device

 echo "NOBURST" > sys:Prefs/Env-Archive/sana2/plipbox.config


My PlipBox would not run with out the NOBURST parameter.

MiamiDx Install

Original Source Local Description MiamiDx10cmain MiamiDx TCP Stack MiamiDx10c-MUI MiamiDx User Interface MiamiDXKeys Activation Keys

From the command line:

lha x MiamiDx10cmain.lha ram:
lha x MiamiDx10c-Mui.lha ram:
lha x MiamiDxKeys.lha ram:

Open Ram Disk on the desktop, and the MiamiDx folder inside.

Run Install_MiamiDx.

From the command line:

copy #?.key#? miami:


MiamiDx and PlipBox

  • Launch MiamiDX
  • Select Hardware Tab and click New:
    • In Select Hardware Type pick Ethernet
    • Enter a name for the hardware, e.g. Name: plipbox
    • Keep Type: SANA II
    • Pick plipbox.device: Driver: devs:networks/plipbox.device
    • Confirm with Ok
  • Select Interfaces Tab and click New:
    • Pick Interface Type: Ethernet
    • Pick Interface connection: LAN
    • Select your hardware: plipbox
    • You can either configure your Amiga statically or with DHCP: Select static or dynamic in IP Type, Netmask Type, Gateway Type. Enter your network parameters in static mode. (You will need to move the slider next to gateway to ‘un-gray’ the box to make an entry)
    •  Multicast: disabled.
  • In Databases Tab select Table DNS servers and add your static DNS server IPs (if you don’t use dynamic DNS via DHCP)
  • Do not forget to save your settings with Amiga+S or Menu: Settings -> Save
  • Now you can go online with your new interface plipbox

You can test your interface is talking with the network with miamiping:

cd miami:
miamiping 192.168.x.x
Please follow and like us:

Amiga Applications And Tools

| October 18th, 2017

Once you have your base Amiga setup, it’s time to load some applications

Original Source Local Description lha Archiver
ADF Device ADF_Device Mount ADF Disk Images on your Amiga Installer-43_3 Updated Installer mui38usr Magic UI


From the command line: Ram:
copy Ram:lha_xxxxx* C:lha*(68k for 68000, 68020 for 020 cpu, 68040 for 040)

ADF Device

From the command line:

lha x adf_device.lha ram:
cd ram:
copy adf.device devs:
copy devs:
copy insertdisk c:
copy removedisk c:
copy insert.script s:
copy remove.script s:

To Mount a disk from the command line:

  • Execute insert.script filename.asf

A pop up will form, asking what device to mount AD0: to AD7:

To dismount a disk from the command line:

  • Execute remove.script

Pick the device to unmount from the pop up.

Installer 43.3

From the command line:

lha x installer-43_4.lha Ram:
cd ram:installer43_3
copy installer c:


From the command line:

lha x mui38usr.lha Ram:

Open Ram Disk on the desktop, and the MUI folder inside.

Run Install-MUI from the icon.

Restart your computer once the install is finished.

Please follow and like us:

Adventures In Amiga Land

| October 18th, 2017
Yet another sporadic entry in my vintage computing blog.

I have an old big-box 2000 that I bought some 20 years ago. I finally decided to take it off of the shelf, watch a bunch of Amiga documentaries to get pumped up, and use probably the most interesting & capable machine I have in my hoard.

Viva Amiga!

From Bedrooms to Billions: The Amiga Years!

As it came as a empty boring beige box, I’ve been slowly adding bits and pieces to make it more useful, as I find affordable upgrade parts. Amiga parts are obscenely expensive, especially for the big box units.

So far, I’ve added a GVP G-Force 25mhz 68030, 2 sticks of 4mb ram, scsi drive, retina Z2 graphics card, 3.x kickstart roms, workbench 3.1, and Plipbox ethernet.

The plan is to document how I set up the amiga (for other people and myself in the future):

Please follow and like us: